Zinsser Allcoat Exterior Satin
In both 1LT OR 2.5LT
Zinsser AllCoat Exterior is an ultimate performance, mould resistant paint that offers supreme protection to all exterior surfaces: wood, metal, masonry, plastic, concrete and cladding. It forms a vapour-permeable, low maintenance, water-shedding coating that is recoatable in 1 hour.
▪ Ideal for airless spray application
▪ Perfect for metal and timber clad factory units and farm outbuildings
▪ Long lasting finish – up to 8 years
▪ Excellent colour retention
▪ Multi-surface application
▪ Fast recoat time - just 1 hour
▪ Easy application self-priming system
▪ Also available in a Gloss finish
▪ Flexible and micro porous
▪ Coverage: 12m2 per Litre
▪ Touch dry: 30 minutes
▪ Hard dry: 7 days
▪ Recoatable: 1 hour
▪ Thinning: Consult technical data sheet
Available in white and black, the paint is self priming and can be applied to previously painted surfaces without sanding, even glossy paints or those coated with
bitumen, tar varnish or creosote. For most jobs, there is no need to purchase a seperate primer.
Zinsser AllCoat Exterior Gloss gives excellent resistance against cracking, blistering and flaking. The tough finish is resistant to rain and severe weather and offers excellent colour retention, in addition the paint contains a biocide to protect the dried coating against fungal degradation.* After removing any existing mould and mildew, two coats of AllCoat Exterior Gloss will ensure that any exterior looks bright and beautiful for years.
The first coat primes and seals the surface, providing a base for the topcoat. The topcoat completes the sealing process while providing additional moisture resistance and protection. This paint is ideally suited to exterior buildings with timber and metal cladding.
*Once dried the paint film is classed as a treated article and contains the surface biocide 4,5-dichloro-2-n-octyl-4-isothiazolin-3-one 0.07% by weight
Write a review
Your Review: Note: HTML is not translated!
Enter the code in the box below: