Timbabuild EWS 300ml

Timbabuild EWS 300ml

Timbabuild® Epoxy Wood Stabiliser is a specially designed two-part low viscosity, solvent free, resin primer which is designed to strengthen weakened wood fibres by penetrating deep into the wood.

EWS is designed to be used as a primer in conjunction with the Epoxy Rapid Cure (ERC10) or Epoxy High Build (EHB60) systems. Once the damaged, decayed and discoloured wood has been removed by use of a suitable cutter tool such as a router or chisel, then the area to be treated is lightly sanded to ensure excellent adhesion. The moisture content of the wood should be no greater than 18% (check using a standard moisture meter) and damp wood should be allowed to dry naturally, or by way of a hot air gun. The two components are mixed manually into a separate container, and thoroughly agitated for one minute. The 2:1 mixing ratio should be strictly observed. EWS should be applied using a standard brush and left to cure for at least 20 minutes.
Use disposable paint brushes - cleaning is not possible after use.

Key benefits

• Solvent Free - suitable for indoors and outdoors
• Excellent Penetration due to the Low Viscosity
• Pre-measured to Volume 2:1 ratio to ensure accurate mix
• High Strength & Durability
• Fast and Simple to Use, Easy to Clean and Store
• Used with both the ERC10 & EHB60 systems

Estimated* Coverage:
 

* This coverage is a guide only based on our own internal tests.

Product Data Sheet HERE

Safety Data Sheet HERE & HERE

MAY BANK HOLIDAY

There will be no collection and no deliveries on Monday 6^th May 2024. Please allow extra time for deliveries over this bank holiday

Due to the high volume of orders we are currently experiencing, we are asking customers to allow 24-72 hours for delivery (UK Mainland)

Orders placed before 1:30pm will be dispatched the same day (applicable to weekdays only)

We unfortunately have closed our showroom for the foreseeable future however we now have a click & collect option at checkout

Returns – If you wish to return any item(s) then this will be done at the customers cost. Goods have to be returned in original packaging.